Binance exchange

Reshaping power: in-depth analysis of the working process of the engine The Binance exchangeengine of the car is the heart of the car. It is the source of power of the car movement and the tool of the car to transcend time and space. The working process of a car engine is a complex physical process, which consists of several stages such as combustion, compression, explosion and cooling. These stages are interrelated and influence each other, and jointly complete the operation process of the engine. In this article, I will deeply analyze the working process of the engine and present you the mystery of the car engine. The combustion stage The combustion stage of the automobile engine is the first stage of the engine and the basis for the normal operation of the engine. The combustion stage refers to the combustion of fuel under the action of oxygen, generating a certain amount of heat and energy, thus pushing the piston to complete the work and making the engine work normally.In the combustion stage, gasoline and air are mixed in the gas chamber of the car engine, and then ignited by the igniter. The resulting flame will release energy, which is the driving force used to drive the movement of the car's piston. At the same time, when the air enters the engine and is mixed with gasoline, it will be heated. The resulting high temperature and high pressure push the mixture to the piston below, so that the piston moves down. When the piston moves down, the fuel and oxygen will be compressed, and the arc sent by the spark plug will ignite the mixture and heat energy will be generated. The combustion stage is one of the most important stages of the engine, because the combustion of fuel not only affects the performance of the engine, but also the life of the engine. Therefore, when using a car, you must ensure the quality of gasoline and do not add low-quality gasoline. Compression stage The compression stage of the automobile engine is the second stage of the engine.At this stage, the piston moves up to compress the mixture to reach the temperature and pressure of ignition. The compression stage mainly completes the process of compressing the mixture to make it easier to burn. In the compression stage, the compression ratio is particularly important, which is an important indicator of engine performance. The higher the compression ratio, the easier it is for the mixture to be ignited, thus producing more energy and improving the performance of the car. However, correspondingly, high pressure and high temperature will put a great burden on the engine and shorten the life of the engine. Therefore, the appropriate compression ratio should be selected according to the actual situation. The burst phase, also known as the burst force transfer stage, is the third stage of the engine. In the process of combustion and compression, high-temperature and high-pressure gas will push the piston down, while transferring the energy of movement to the vehicle tires to generate power.This stage is usually the most important, because the ability of the engine to transmit power directly affects the performance of the vehicle. In the burst phase, the combustion of the mixture and the energy generated by its explosion will make the piston move down, while driving the movement of the connecting rod and crankshaft. Specifically, the kinetic energy generated by the piston in the process of moving from TDC (upper dead point) to BDC (lower dead point) is the force that rotates the crankshaft and drives the connecting rod to work. Through the relationship between the connecting rod head and the piston, fluid motion can be converted into mechanical motion to realize the transmission of engine power. Cooling stage The cooling stage of the automobile engine is the last stage of the engine. During the operation of the car engine, heat is constantly generated. If the heat is not dissipated in time, it will cause the engine to overheat or even damage. Therefore, it is necessary to turn on the cooling system to help the engine dissipate heat and stabilize the water temperature.The cooling system usually uses the pump to circulate water to take away the heat generated inside the engine and dissipate it from the inside of the engine. Through this process, the engine can continuously absorb heat energy, so as to ensure the stability of the water temperature of the engine. At the same time, the cooling system also helps to slow down the wear of the engine and improve the life of the engine. In summary, automobile engines are a very important part of automobiles, and the performance and effectiveness of automobiles are directly affected by the efficiency of the engine. The working process of the engine is mainly composed of several stages such as combustion, compression, explosion and cooling. Through these stages, they are interrelated and influence each other to complete the operation process of the engine together. For us, understanding the working process of the engine can help us better understand the car, so as to better maintain and repair our car. At the same time, it is recommended that everyone must pay attention to refueling and maintenance when using the car, so as to extend the life of the engine.

Contact Us
Phone：020-83484615